Install Center Luggage Compartment Floor

NOTE: TECHNICAL INFORMATION
Use only approved spot welder for repair.
For additional information see: 41 00... Workshop equipment

Install and secure the new parts.
Weld the new parts in the area (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the left and right side.
Weld the new parts in the area (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Weld the new parts in the area (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Weld the new parts in the area (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Weld the new parts in areas (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work