Body Gap Dimensions REH-Hin-P-4100-G22 - V.2 (4' Series Coupe)

General Notes

Gap Dimensions

The dimensions stated in this service information apply at an object temperature of 20 °C.

The aim of adjustment is to achieve a uniform gap.

Symmetry of the gaps between left and right sides of the vehicle has top priority.

In terms of door gaps the maximum deviation between the front and rear door gap must be 1.0 mm.

No gap dimension are specified for components which cannot be adjusted.

Fig 1: Hood And Front Bumper Cover Body Panel Gap Dimensions And Measurement Points (4 Series Coupe)

G00638236

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Hood And Headlamp Body Panel Gap Dimensions And Measurement Points (4 Series Coupe)

G00638237

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 3: Hood And Front Fender Body Panel Gap Dimensions And Measurement Points (4 Series Coupe)

G00638238

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 4: Front Fender And A-Pillar Body Panel Gap Dimensions And Measurement Points (4 Series Coupe)

G00638239

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 5: Windshield And Roof Panel Body Panel Gap Dimensions And Measurement Points (4 Series Coupe)

G00638240

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 6: Front Door And Front Fender Body Panel Gap Dimensions And Measurement Points (4 Series Coupe)

G00638241

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 7: Front Door And Door Sill Trim Body Panel Gap Dimensions And Measurement Points (4 Series Coupe) (1 Of 2)

G00638242

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 8: Front Door And Door Sill Trim Body Panel Gap Dimensions And Measurement Points (4 Series Coupe) (2 Of 2)

G00638243

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 9: Front Door And Quarter Panel Body Panel Gap Dimensions And Measurement Points (4 Series Coupe)

G00638244

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 10: Front Door Glass And Quarter Glass Body Panel Gap Dimensions And Measurement Points (4 Series Coupe)

G00638245

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 11: Rear Glass And Roof Body Panel Gap Dimensions And Measurement Points (4 Series Coupe)

G00638246

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 12: Quarter Panel And Trunk Lid Body Panel Gap Dimensions And Measurement Points (4 Series Coupe) (1 Of 2)

G00638247

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 13: Quarter Panel And Trunk Lid Body Panel Gap Dimensions And Measurement Points (4 Series Coupe) (2 Of 2)

G00638248

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 14: Trunk Lid And Rear Bumper Cover Body Panel Gap Dimensions And Measurement Points (4 Series Coupe)

G00638249

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 15: Sunroof And Roof Body Panel Gap Dimensions And Measurement Points (4 Series Coupe) (1 Of 2)

G00638250

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 16: Sunroof And Roof Body Panel Gap Dimensions And Measurement Points (4 Series Coupe) (2 Of 2)

G00638251

Courtesy of BMW OF NORTH AMERICA, INC.