Body Gap Dimensions REH-Hin-P-4100-G22 - V.2 (4' Series Convertible)

General Notes

Gap Dimensions

The dimensions stated in this service information apply at an object temperature of 20 °C.

The aim of adjustment is to achieve a uniform gap.

Symmetry of the gaps between left and right sides of the vehicle has top priority.

In terms of door gaps the maximum deviation between the front and rear door gap must be 1.0 mm.

No gap dimension are specified for components which cannot be adjusted.

Fig 1: Hood And Front Bumper Cover Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638236

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Hood And Headlamp Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638237

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 3: Hood And Front Fender Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638238

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 4: Front Fender And A-Pillar Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638252

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 5: Windshield And Roof Panel Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638253

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 6: Front Door And Front Fender Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638241

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 7: Front Door And Door Sill Trim Body Panel Gap Dimensions And Measurement Points (4 Series Convertible) (1 Of 2)

G00638242

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 8: Front Door And Door Sill Trim Body Panel Gap Dimensions And Measurement Points (4 Series Convertible) (2 Of 2)

G00638243

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 9: Front Door And Quarter Panel Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638244

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 10: Front Door Glass And Quarter Glass Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638254

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 11: Rear Convertible Top And Convertible Top Lid Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638255

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 12: Quarter Panel And Trunk Lid Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638256

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 13: Quarter Panel And Convertible Top Lid Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638257

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 14: Trunk Lid And Convertible Top Lid Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638258

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 15: Trunk Lid And Rear Bumper Cover Body Panel Gap Dimensions And Measurement Points (4 Series Convertible)

G00638249

Courtesy of BMW OF NORTH AMERICA, INC.