Remove top automatic air flap control
- Have the set of special tools 0 493 752 (00 9 329)
ready.
- Release detent (1)
and feed out cover (2)
downwards.
- Unlock plug connection (1) and disconnect.
- Clip out the cable for the acceleration sensor with the holder (2)
and feed out of the guide (3)
.
- Loosen screws (1) .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
NOTE:
The operations shown only for one side must be carried out on both sides.
- Release the top air flap control (1)
with a suitable special tool.
Lever out the ball head (2) upwards.
- Feed out the top air flap control (1) upwards.
- Unlock associated plug connections and disconnect.