Installing the lin power distribution box

• Position the lin power distribution box (1) correctly and shift the locking device (2) in arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the power distribution (2) correctly and engage it into the holder (3).

  Detents (1) must engage correctly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the pdc/pma control unit (2) to the top into the holder.
• Lock the lock (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48V ELECTRICAL SYSTEM .