Installing the control unit for the contact detection
- Connect both connectors (1) to the control unit (2).
- Install control unit (1) in the steering wheel.
Follow-up work
- Refer to INSTALLING COVER FOR THE SPORT STEERING WHEEL .
- Refer to IF INSTALLED: INSTALLING THE SHIFT PADDLES FOR THE AUTOMATIC TRANSMISSION .
- Refer to INSTALLING THE AIRBAG UNIT (SPORTS STEERING WHEEL) .
- Refer to CONNECTING ALL BATTERY GROUND LEADS .
- Refer to ACTIVATING THE 48V ELECTRICAL SYSTEM .
- Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .