Removing the guide sleeve for the rear head restraint
Precondition
- Rear seat backrest is folded.
NOTE:
Description is for left component only. Procedure on the right side is identical.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
Preliminary work
- Refer to REMOVING THE REAR HEAD RESTRAINT ON THE SIDE .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
NOTE:
The description is provided only at one component. The procedure is the same for all other components.
- Push the detent (1) inward with the special tool 0 494 627 (52 0 070) .
- Remove the guide sleeve towards the top.