Installing the guide sleeve for the rear head restraint

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Observe installation location .
The guide sleeve with visible unlocking (1) must be on the left in the driving direction.

The guide sleeve without visible unlocking (2) must be on the right in the driving direction.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The description is provided only at one component. The procedure is the same for all other components.
Insert the guide sleeve (1) into the rear seat backrest from above and lock it in place.
The guide sleeve (1) must snap-in noticeably.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work