Removing the instrument cluster
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: 61 35... NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION .
Preliminary work
- Refer to ADJUSTING THE STEERING COLUMN POSITION .
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to REMOVING STEERING COLUMN SHROUD UPPER SECTION .
- Refer to REMOVING THE GAP COVER .
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: 61 35... NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION .
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
NOTE:
RISK OF DAMAGE
Damage of high-quality surfaces.
Plastic wedges can damage high-quality surfaces.
Damage of high-quality surfaces.
Plastic wedges can damage high-quality surfaces.
- Protect surfaces from damage.
- Unclip the cover (1) on the instrument cluster (2).
- Loosen screw (3).
- Release the screws (1) on the instrument cluster (2).
- Fir the plastic adhesive tape (1) on to the decorative strip (2).
CONSUMABLE SPECIFICATION
| Yellow plastic adhesive tape | 83199410979 |
NOTE:
RISK OF DAMAGE
Damage to the component.
Excessive force may damage the component.
Damage to the component.
Excessive force may damage the component.
- Handle component carefully.
- Pull the instrument cluster (1) manually in arrow direction (A) and build up slight preload.
- Slide the instrument cluster (1) manually upwards in arrow direction (B).
NOTE:
RISK OF DAMAGE
Damage to the component.
Excessive force may damage the component.
Damage to the component.
Excessive force may damage the component.
- Handle component carefully.
- Pull the instrument cluster (1) manually in arrow direction (A) and build up slight preload.
- Slide the instrument cluster (1) manually upwards in arrow direction (B).
NOTE:
TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.
Conduct the following operation with the assistance of a second person.
- Feed the instrument cluster (1) upwards with the hook (2) out from the clamps (3).
NOTE:
TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.
Conduct the following operation with the assistance of a second person.
- Unlock plug connections (1) and disconnect.
- Feed out the cable (2) from the holders (arrows).
- Unclip all cable brackets (3).
- Feed out and remove the instrument cluster (4).