Install the tweeter in the side trim panel at the rear
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Attach the tweeter (3) and engage into the locking mechanisms (arrowed).
- Clip in the resistor (2) .
- Connect plug connection (1) and lock.
- If necessary, position the acoustic fleece correctly.
Follow-up work
- Refer to INSTALLING SOUND INSULATION ON THE SIDE TRIM PANEL .
- Refer to INSTALLING REAR TRIM PANEL .
- Refer to INSTALLING THE UPPER TRIM PANEL ON ROLLOVER PROTECTION SYSTEM .
- Refer to INSTALLING THE REAR LEFT AND RIGHT HEAD RESTRAINT GUIDES .
- Refer to INSTALLING REAR LEFT AND RIGHT HEAD RESTRAINTS .
- Refer to INSTALLING REAR SEAT BACKREST .
- Refer to INSTALLING THE LEFT AND RIGHT BACKREST SIDE SECTION .
- Refer to INSTALLING THE REAR SEAT .
- Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
- Refer to ATTACHING THE REAR OUTER WINDOW RECESS FINISHER STRIP .