Installing the 12 V socket in the luggage compartment
NOTE:
Schematic diagram is for example purposes. some parts may differ in certain details.
- Install 12V socket (1) in the luggage compartment wheel arch trim panel.
- Pay attention to the guide (2) in the luggage compartment wheel arch trim panel.
- Tighten the 12V power socket on the retaining ring (1).
tightening torque specification
| 12V socket on the luggage compartment wheel arch trim panel | ||
|---|---|---|
| Retaining ring | Tightening torque | 3 nm |
Follow-up work
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON RIGHT .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to IF INSTALLED: INSTALLING THE EMERGENCY WHEEL .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .