Install ride height sensor, front

• Install the ride height sensor (2).
• Replace the screw (1).

  Parts:  Screw

• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Ride height sensor to holder
  M5 Replace screw.	tightening torque	5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip the attachment rod (1) into the ride height sensor.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.
• Clip in the cable bracket (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to CARRYING OUT RIDE HEIGHT ADJUSTMENT .
• Refer to ADJUSTING HEADLIGHTS .
• Refer to RESETTING THE TIRE PRESSURE MONITOR .