Removing the electrical drive unit from the assembly jig

• Mount electric drive unit (3) using 5 A2B A98 and 2 456 428 to 2 220 718. 
• Slacken screws (2) by half a revolution.
• 2 455 010  Release from 2 413 082  and lift up.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).
• 2 455 010  Remove from electric drive unit (3) using 5 A1B E90  .

Courtesy of BMW OF NORTH AMERICA, INC.