Removing the roof switch console (FZD)
NOTE:
Risk of damage
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
NOTE:
Risk of damage
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. only use the original packaging for returning the product. always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with esd symbol).
- For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .
NOTE:
Technical information
With the optional equipment sa6ua, the camera for gesture control is integrated in the roof control module. separate exchange of this camera in the event of a fault is not possible.
With the optional equipment sa6ua, the camera for gesture control is integrated in the roof control module. separate exchange of this camera in the event of a fault is not possible.
Preliminary work
- Unclip the cover (1).
- Loosen screws (1).
- Unclip the roof function center (FZD) (1) from the clamps (2).
- Ease out the roof function center (FZD) (1) from the guides (3).
- Unlock and disconnect plug connections (1).
- Unclip the cable bracket from FZD (2) and remove FZD (2).