LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2021 >> 430i 2D Convertible >> Repair and Diagnosis >> General Information >> OEM General Information >> General Orphan Data (3 Of 3) >> Install the front section of the front right wheel arch cover

Install the front section of the front right wheel arch cover

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the front section of the front wheel arch cover 

NOTE: To provide a better overview: Schematic diagram with partially hidden components.
TIGHTENING TORQUE SPECIFICATION

Wheel arch trim panel, front 
Thermoplastic hexagon screw Tightening torque  2.6 Nm
G14644103Courtesy of BMW OF NORTH AMERICA, INC.


NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the front section of the front wheel arch cover 

NOTE: To provide a better overview: Schematic diagram with partially hidden components.
TIGHTENING TORQUE SPECIFICATION

Wheel arch trim panel, front 
Thermoplastic hexagon screw Tightening torque  2.6 Nm
G14644103Courtesy of BMW OF NORTH AMERICA, INC.