Install both antenna amplifiers

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the antenna amplifier

NOTE: TECHNICAL INFORMATION
The number of connectors on the described component may vary depending on the equipment version.
If necessary, unlock and disconnect, or connect and lock, all other connectors.

Correctly position the antenna amplifier (3).
Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATION

Antenna amplifier to body
Screw	tightening torque	3 Nm

Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.