Partially installing the Install luggage compartment wheel arch trim panel on right

• Feed in the luggage compartment wheel arch trim panel (2) in the rear area below the sealing lip of the tailgate seal.
• Feed in the lug of the luggage compartment wheel arch trim panel (2) on the outer side of the hinge in the lock on the trim (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure expanding rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Installing the emergency release handle for the tailgate (additional work for US version) 

• Attach the Bowden cable (2).
• Fasten the emergency release handle (1) for the tailgate to the holder.

Courtesy of BMW OF NORTH AMERICA, INC.