Install the luggage compartment wheel arch trim panel on right partially

• Connect connectors (1) and lock.
• Swivel the luggage compartment wheel arch trim panel outward.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the luggage compartment wheel arch trim panel and clip in with the clip (2).
• Feed in the luggage compartment wheel arch trim panel under the sealing lip of the tailgate seal.
• Secure expanding rivet (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
• Fold out multi-function hook (1).
• Tighten down screw (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUE SPECIFICATION
  
  

  Control unit to mount
  Oval-head screw for thermoplastic	Tightening torque	3 Nm

• Clip in the cover (2).
• Fold in the multifunction hook (1).

Installing the emergency release handle for the tailgate (additional work for US version) 

• Attach the Bowden cable (2).
• Fasten the emergency release handle (1) for the tailgate to the holder.

Courtesy of BMW OF NORTH AMERICA, INC.

• Position the rear lashing eye (3) and tighten the screw (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUE SPECIFICATION
  
  

  Lashing point to body
  M8 screw	Tightening torque	19 Nm

• Clip in the cover (1).