If installed: Removing the lane change warning sensor

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

• Unlock and remove the absorber (1) at the snap-in lugs (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (2) and disconnect.
• Unclip clip (1).
• Place wiring harness to one side.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the detents and remove the lane change warning sensor (1) in the arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.