LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
430i 2D Convertible
>>
Repair and Diagnosis
>>
General Information
>>
OEM General Information
>>
General Orphan Data (1 Of 3)
>>
Remove the connecting support from the tunnel
Remove the connecting support from the tunnel
Remove screws (arrows).
NOTE:
The following step(s) must be performed if the listed component(s) is/are installed.
Loosen clamp (1).
Loosen screws (2).
Feed out and remove the connecting support (3) on the tunnel.
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.