Installing the electric drive unit in the front subframe

Position the electric drive unit (1) over the front subframe so that the points (arrows) lie on top of each other.

Courtesy of BMW OF NORTH AMERICA, INC.
Install electric drive unit (1) downwards in the front subframe using special tool 2 220 718, 2 456 428 and 5A2B A98.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1) .

TIGHTENING TORQUE SPECIFICATION

Rubber mount to highly integrated electrified drive topology
M14 Replace screw.	Tightening torque	165 Nm
	Angle of rotation	90°

G15580658

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1) .

TIGHTENING TORQUE SPECIFICATION

Rubber mount to highly integrated electrified drive topology
M14 Replace screw.	Tightening torque	165 Nm
	Angle of rotation	90°

G15580659

Courtesy of BMW OF NORTH AMERICA, INC.

Remove special tool 2 456 428 and 5 A2B A98 from the electric drive unit.
Remove special tool 0 496 733 (00 6 080) from loop (1) .

Courtesy of BMW OF NORTH AMERICA, INC.