Replace door trim panel

Preliminary work 

• Refer to REMOVING THE ENTRY LIGHT ON THE FRONT DOOR TRIM PANEL .
• Refer to REMOVING FRONT DOOR TRIM PANEL .
• Refer to REMOVING THE SOUND INSULATION ON THE FRONT DOOR TRIM PANEL .

• Replace door trim panel.

  Parts:  Door trim panel

Replacing the speaker cover on the door trim panel 

• Replace the speaker cover.

  Parts:  Speaker cover

• Saw off all welding pins (1) along the molding (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Carefully spot-weld (arrows) and drill out with the special tool 5 A3C D25  .
• Loosen screw (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Pull the handle (1) from the door trim panel as shown and install the speaker cover (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure all the welding pins (arrows) using lock washers (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the handle correctly.
• Insert and tighten repair screws (2).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Repair screw to door trim panel
  Oval-head screw M4x10	tightening torque	2.0 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Handle on door trim panel
  Oval-head screw	Tightening torque	2.0 Nm

Install inner door opener 

• Shorten all the welding pins (1) by 6 mm.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove welding remnants on door trim panel with a scalpel.
• Install the door opener in the door trim panel.
• Secure all the welding pins (arrows) using lock washers (2).
• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Inner door opener to door trim panel
  Oval-head screw	Tightening torque	2.0 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• If necessary, install the existing LED modules.

Remove the power window switch on the driver's side 

• Unlock plug connection (1) and disconnect.
• Release all detents (2) and remove the power window switch (3) from the door trim panel (4).

Courtesy of BMW OF NORTH AMERICA, INC.

Install the power window switch on the driver's side 

• Position power window switch (3) on door trim panel (4) and engage it in all the detents (2).
• Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

• Remount door wiring harness (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SOUND INSULATION ON FRONT DOOR TRIM PANEL .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to INSTALLING THE ENTRY LIGHT ON FRONT DOOR TRIM PANEL .