33 52 Rear Shock Absorbers
3352 TIGHTENING TORQUE OVERVIEW
| Nut and locknut/self-locking nut | ||
| M8x40 Replace screws. |
Tightening torque | 28 Nm |
| Shock absorber to camber control arm | ||
| M12 Replace nut and screw. Tighten in normal position. |
Joining torque | 100 Nm |
| Angle of rotation | 90° | |
| Support bearing on shock absorber | ||
| M10 Replace nut. |
Tightening torque | 41 Nm |