Install Hood
NOTE:
RISK OF DAMAGE
Mechanical effects .
Paint damage .
Mechanical effects .
Paint damage .
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
NOTE:
Perform the steps on the right and left side.
- Fit the hood and position it on the hinge.
- Support the hood.
- Tighten nuts (1) and (2).
TIGHTENING TORQUE SPECIFICATION
| Hood to the hinge | ||
|---|---|---|
| Nut M8 | Tightening torque | 19 Nm |
Follow-up work