Removing The Tail Panel

NOTE: Perform the steps on the left and right side.

Carry out rough cut (1) as shown below the tail light holder.
Completely cut through the tail panel.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen the welded connections in the area (1) and remove the tail panel.

Courtesy of BMW OF NORTH AMERICA, INC.
Release the welded connections in areas (1) and (2) and remove section (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Release the welded connections in the area (1) and remove the section (2).

Courtesy of BMW OF NORTH AMERICA, INC.