Install Wheel Arch

• Preclean all bonding surfaces with solvent cleaner R2.
  CONSUMABLE SPECIFICATION
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Clean all bonding surfaces with solvent cleaner R1.
  CONSUMABLE SPECIFICATION
  
  

  Cleaning agent R1

  100 ml, Bottle

  83192211217

• Apply adhesive K1 to bonding surfaces.
  ADHESIVE SPECIFICATION
  
  

  Body adhesive K1

  195 ml

  83190413015

• Install the new parts with an alignment bracket or a universal mount.

  During installation, ensure that sufficient adhesive has been applied to all bonding surfaces.

• Rivet the new part in the areas (1) and (2) with blind rivets N2.
  CONSUMABLE SPECIFICATION
  
  

  Blind rivet N2  Ø 6.5 mm; clamping area 4.8-6.8 mm

  83190301419

  Courtesy of BMW OF NORTH AMERICA, INC.

• Rivet the new part in the areas (1) and (2) with blind rivets N1.
  CONSUMABLE SPECIFICATION
  
  

  Blind rivet N1  Ø 6.5 mm; clamping area 2.8-4.8 mm

  83190301414

  Courtesy of BMW OF NORTH AMERICA, INC.

• Rivet the new part in the areas (1) with blind rivets N1.
  CONSUMABLE SPECIFICATION
  
  

  Blind rivet N1  Ø 6.5 mm; clamping area 2.8-4.8 mm

  83190301414

  Courtesy of BMW OF NORTH AMERICA, INC.

• Rivet the new part in the areas (1) with blind rivets N1.
  CONSUMABLE SPECIFICATION
  
  

  Blind rivet N1  Ø 6.5 mm; clamping area 2.8-4.8 mm

  83190301414

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clean all bonding surfaces with solvent cleaners R2 and R1.

  Apply adhesive K1 to bonding surfaces.

• Join the new parts and rivet the in the areas (1) with blind rivets N1.
  CONSUMABLE SPECIFICATION
  
  

  Blind rivet N1  Ø 6.5 mm; clamping area 2.8-4.8 mm

  83190301414

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clean all bonding surfaces with solvent cleaners R2 and R1.

  Apply adhesive K1 to bonding surfaces.

• Install the new parts and rivet them with blind rivets N1 in the area (1).
  CONSUMABLE SPECIFICATION
  
  

  Blind rivet N1  Ø 6.5 mm; clamping area 2.8-4.8 mm

  83190301414

  Courtesy of BMW OF NORTH AMERICA, INC.

• Rivet the new part in the area (1) with blind rivets N1.
  CONSUMABLE SPECIFICATION
  
  

  Blind rivet N1  Ø 6.5 mm; clamping area 2.8-4.8 mm

  83190301414

  Courtesy of BMW OF NORTH AMERICA, INC.

• Rivet the new part in the area (1) with blind rivets N2.
  CONSUMABLE SPECIFICATION
  
  

  Blind rivet N2  Ø 6.5 mm; clamping area 4.8-6.8 mm

  83190301419

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  For additional information see: 41 00...
  Installation of a cavity sealing (not expanding)
• Apply sealant D1 to the cavity sealing (1) and install the cavity sealing.
  CONSUMABLE SPECIFICATION
  
  

  Sealant D1 (seam sealing)

  310 ml

  83422409985

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clean the bonding surface (1) with solvent cleaners R2 and R1.
• Apply adhesive K1 to the bonding surface (1).
• Apply sealant D1 to the cavity sealing (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the new part and rivet it in the areas (1) and (2) with punch rivets N4.

  Area	Description	Number
  1	N4	8
  2	N4	8

  CONSUMABLE SPECIFICATION
  
  

  Punch rivet N4  Ø 3 mm; 4 mm long

  83192457307

  Courtesy of BMW OF NORTH AMERICA, INC.

• Rivet the new part in the area (1) with blind rivets N1.
  CONSUMABLE SPECIFICATION
  
  

  Blind rivet N1  Ø 6.5 mm; clamping area 2.8-4.8 mm

  83190301414

  Courtesy of BMW OF NORTH AMERICA, INC.

• In the bonding surface (1), set 3 punch rivets N4 according to the illustration.
  CONSUMABLE SPECIFICATION
  
  

  Punch rivet N4  Ø 3 mm; 4 mm long

  83192457307

• Install the reinforcement plates (2) and attach by welding.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the new part section and weld it in the areas (1) through (3).

  When doing so, pay attention to the adhesive area (4) of the aluminum spring support. Avoid high heat input in the adhesive area.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clean the bonding surface (2) with solvent cleaners R2 and R1.
• Apply adhesive K1 to the bonding surface (2).
• Attach the bracket (1) and rivet it with blind rivets N1.
  CONSUMABLE SPECIFICATION
  
  

  Blind rivet N1  Ø 6.5 mm; clamping area 2.8-4.8 mm

  83190301414

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount two EMC screws in areas (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work