Removing The Left Luggage Compartment Floor

Make the separating cut (1) as shown.
Select the separating cut (1) so that the area (3) can be used for overlapping joining.
Open welded connections in area (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: To provide a better overview: Shown without side panel and without tail panel.
Open welded connections in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Open welded connections in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Open welded connections in area (1) and remove the support.

Courtesy of BMW OF NORTH AMERICA, INC.