Opening Brazed Connections Rep-Alg-RAGRP41-4105305 - V.2 (4' Series Coupe, Convertible, And Gran Coupe Sedan)
The "Bonding and Riveting" repair method involves replacing the watertight brazed connection with adhesive.
This gives rise to a new procedure for opening brazed connections.
Grind brazed seam with a belt grinder. This keeps the influence of heat in the area around the brazed seam as small as possible.
IMPORTANT:
Never use a gas flame.
All traces of brazing solder do not have to be removed.
Do not grind body panels thin.
All traces of brazing solder do not have to be removed.
Do not grind body panels thin.