Installing front brake pads

• If applicable, observe the identification of the removed brake pads.

  The brake pads must not be replaced in case of a one-sided pad wear.

• Install the brake pads (1)  in the brake caliper in the arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the special tool (cable tie) 2 413 317.
• Install the brake caliper (3)  .
• Replace screws.

  Parts:  Screws

• Tighten the screws (1)  , if applicable, hold against the hexagon head (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FRONT BRAKE PAD WEAR SENSOR .
• Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .
• Refer to COMMISSIONING/BEDDING IN (BRAKE) NEW BRAKE PADS AND BRAKE DISCS .