Removing roller sunblind for the panorama glass roof

• Shift the roller sunblind (1)  to the rear on both sides, rolling it up a few cm.
• Roll up the roller sunblind (1)  until it can be locked using a suitable tool (2)  (e.g. paperclip) above the mounting jig (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fully open the roller sunblind manually (1)  until you feel a slight resistance.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Perform the steps on the left and right side.
• Feed up the adjuster (1)  out of the slider of the roller sunblind (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the roller sunblind (1)  out of the slide/tilt sunroof frame (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.