Install the left rear seat backrest

Precondition 

Left rear seat backrest folded down

• Correctly position the left rear seat backrest (2).
• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Rear seat backrest on body
  screw Replace screw.	Tightening torque	42 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the center bearing bracket (2) correctly.
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE CENTER REAR SEAT BACKREST .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to INSTALLING THE REAR SEAT BACKREST .
• Refer to INSTALLING THE LEFT AND RIGHT BACKREST SIDE SECTION .
• Refer to INSTALLING THE REAR SEAT .