Mounting the rear panel on the front seat backrest

Check the guides and clamps (1) for damage. If necessary, replace the rear panel.

Courtesy of BMW OF NORTH AMERICA, INC.
G28:
Connect connector (1) of rear panel (2) to the seat wiring harness and lock it.

Courtesy of BMW OF NORTH AMERICA, INC.
Guide in the rear panel (1) onto the clamps (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the rear panel (1) and clip into the clamps (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATION

Rear panel to seat frame
Sheet metal screw Tightening torque	Tightening Torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.