Install outer cover on front seat

Check the detents (1) for damage. If necessary, replace cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Connect and lock connector (1) and, if necessary, clip it into the cable bracket.

Courtesy of BMW OF NORTH AMERICA, INC.
Guide in and position the cover panel (2).
Engage cover panel (2) at the detents (3).

Tighten down screw (1).

TIGHTENING TORQUE SPECIFICATION

Seat trim to seat frame
Sheet metal screw	tightening torque	2.5 Nm

G14306533

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATION

Outer seat trim to seat frame
Screw	Tightening torque	3.5 Nm

Position adjustment lever (2) of the seat height adjustment.
Tighten down screw (1).
Clip in the cover (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Guide in the handle (1) for the backrest tilt adjustment from above.
Check to ensure that snap-in lug (2) fits correctly.

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in the handle (1) for the seat height adjustment.

G14306540

Courtesy of BMW OF NORTH AMERICA, INC.