Removing upper cross connection

Preliminary work 

• Refer to REMOVING SEAL FOR FRONT HOOD .
• Refer to REMOVING THE COVER FOR THE CENTER ENGINE COMPARTMENT .
• Refer to REMOVING THE LEFT AND RIGHT FRONT-END STRUT .

• Release the housing (1) for the coupling of Bowden cable from the body.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Detach Bowden cable (1) on the upper cross connection.
• Loosen screws (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1) and (2).
• Remove the upper cross connection upwards with the holders (3).

Courtesy of BMW OF NORTH AMERICA, INC.