Install front underbody protection
- Version A:
Feed in the front underbody protection (1) towards the front under the bumper cover and position.
Tighten the screws (arrows).
TIGHTENING TORQUE SPECIFICATIONUnderbody protection front Hexagon screw for thermoplastic tightening torque 2.6 Nm Hexagon screw M6x20 tightening torque 8 Nm - Version B:
Feed in and position the front underbody protection (1).
Tighten the screws (arrows).
TIGHTENING TORQUE SPECIFICATIONUnderbody protection front Hexagon screw for thermoplastic tightening torque 2.6 Nm Hexagon screw M6x20 tightening torque 8 Nm - Version C:
Feed in and install front underbody protection (1).
Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATIONUnderbody protection front Hexagon screw for thermoplastic tightening torque 2.6 Nm Hexagon screw M6x20 tightening torque 8 Nm