Installing loading edge trim

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Check the clamps (1) for damage and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed loading edge trim (2) in beneath sealing lip of tailgate seal.
Fit the trim of the loading edge (2) at the detents (3) and clip it in to the bottom.
Secure expanding rivet (1).

G14644013

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to IF INSTALLED: INSTALLING THE EMERGENCY WHEEL .
Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .