LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
430i 2D Convertible
>>
Repair and Diagnosis
>>
Body & Frame
>>
Mirrors
>>
Body Equipment -- Repair (G22, G23 & G26) (1 Of 3)
>>
51 16 Mirrors, Consoles, Interior Trim
>>
51 16 202 Removing and installing/replacing front cup holder (4' Series coupe, convertible, and Gran Coupe sedan)
>>
Install the cup holder
Install the cup holder
Position the cup holder (2) and connect the associated connector.
Correctly position the cup holder (2).
Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATION
Cup holder to center console
Oval-head screw
tightening torque
1.8 Nm
Courtesy of BMW OF NORTH AMERICA, INC.
Insert the insert (1).
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.