Installing the trim on the rear bumper cover

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Check

Check detents (1) and the detents (arrows) on the trim for damage.

G15516208

Courtesy of BMW OF NORTH AMERICA, INC.

Result

» Detents (1) or the detents (arrows) are damaged.

Measure

Replace the trim.
Position the trim (1) and clip it in at the detents (arrows) into the bumper cover.

G15516207

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE COVER OF THE TOWING EYE .
Refer to INSTALLING THE LEFT AND RIGHT REFLECTOR .
Refer to INSTALLING THE REAR BUMPER COVER .
Refer to INSTALLING THE TAIL LIGHT ON THE LEFT AND RIGHT SIDE PANELS .
Refer to INSTALLING THE TRIM IN THE WATER CHANNEL ON THE LEFT AND RIGHT .
Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE LEFT AND RIGHT .
Refer to INSTALLING LOADING EDGE TRIM .
Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .