Removing the seat-belt extender controller (LCPA)
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING SEAT-BELT ASSISTANT HAND .
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING ARMREST SIDE SECTION .
- Refer to REMOVING C-PILLAR TRIM PANEL .
- Refer to REMOVING THE INNER DOOR SILL COVER STRIP .
- Refer to REMOVING REAR SIDE TRIM PANEL .
- Refer to REMOVING THE SOUND INSULATION ON THE SIDE TRIM PANEL .
- Refer to REMOVING SEAT BELT EXTENDER .
- Refer to REMOVING THE ARMREST ON THE SIDE TRIM PANEL .
- Slide insulation (1) aside as shown.
- Unlock plug connections (2) and disconnect.
- Unlock the latch mechanisms (3).
- Pull the seat-belt extender controller (LCPA) (4) in arrow direction from the holder (5).