Installing The Rear Outer Wheel Arch Section

• Pre-clean the bonding surfaces on vehicle and on new part.
  CONSUMABLE SPECIFICATION
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Clean the bonding surfaces on the new part and on the vehicle.
  CONSUMABLE SPECIFICATION
  
  

  Cleaning agent R1

  100 ml, Bottle

  83192211217

• Apply adhesive to bonding surfaces.
  ADHESIVE SPECIFICATION
  
  

  Body adhesive K5

  50 ml

  83192158654

• Install new part.
• Rivet the new part in area (1) with blind rivets.
  CONSUMABLE SPECIFICATION
  
  

  Blind rivet N3  Ø 4 mm; clamping area 1-3 mm

  83190301421

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  For additional information see: 41 00...
  Installation of a cavity sealing (not expanding)
• Apply sealant to the new cavity sealing (1). Install cavity sealing (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work