LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
430i 2D Convertible
>>
Repair and Diagnosis
>>
Body & Frame
>>
Door Locks
>>
Body Equipment -- Repair (G22, G23 & G26) (3 Of 3)
>>
51 64 Front Panel, Front End
>>
51 64 035 Removing and installing/replacing the upper section cross connection (4' Series coupe, convertible, and Gran Coupe sedan)
>>
Replacement: Rebuild the holder
Replacement: Rebuild the holder
Release and remove holder (1) with detents (2) from the cross connection at the top.
Courtesy of BMW OF NORTH AMERICA, INC.
Check detents (2) of holders (1) for damage and, if necessary, replace holders (1).
Clip holders (1) into the new cross connection at the top with detents (2).
Courtesy of BMW OF NORTH AMERICA, INC.
Courtesy of BMW OF NORTH AMERICA, INC.