Installing the seat cover for rear seat
- Position the seat cover on the cushion.
- Secure all trim wires with clamps.
- Replace the clamps (2).
Parts: Clamps
- Insert the clamp (2) with the special tool 0 492 668 (52 0 050) .
- Clasp the trim wire (3) of the cushion (1) and the trim wire (4) of the backrest covering with the clamp (2) and bend the clamp (2).
- Clip in the seat cover for rear seat (1) at the marked points (2).
- Carefully clip in the covers (1) in the rear seat (2).