LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
430i 2D Convertible
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Mirrors
>>
Body Equipment -- Repair (G22, G23 & G26) (3 Of 3)
>>
51 71 Gaskets And Loose Body Parts
>>
51 71 040 Removing and installing/replacing front left or right wheel arch cover (front and rear section) (4' Series coupe and convertible models)
>>
Install the rear section of the front wheel arch cover
Install the rear section of the front wheel arch cover
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
Install the rear section of the front wheel arch cover (2).
Tighten screws (arrows).
TIGHTENING TORQUE SPECIFICATION
Wheel arch trim panel, front
Thermoplastic hexagon screw
Tightening torque
2.6 Nm
Courtesy of BMW OF NORTH AMERICA, INC.
Secure expanding rivet (1).