Installing the fog light

• Feed in and correctly position fog light (4).
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Fog light on bumper cover
  Screw	tightening torque	3.5 Nm

• Connect connectors (2) and lock.
• Clip in the cable bracket (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER .
• Refer to MOUNTING THE WHEEL .
• Refer to ADJUSTING FOG LIGHTS .