Remounting the LED turn signal

Removing the LED turn signal 

• Loosen screws (1)  .
• Feed out the LED turn signal (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (1)  and disconnect.
• Remove the LED turn signal (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Installing the LED turn signal 

• Check seal (3)  for damage and replace if necessary.
• Position the LED turn signal (2)  .
• Connect connectors (1)  and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in and correctly position the LED turn signal (2)  .
• Tighten down screws (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.