12 14 ENGINE SENSORS (430i and 430i xDrive coupe, convertible, and Gran Coupe sedan)
1214 TIGHTENING TORQUE OVERVIEW
| Camshaft position sensor for exhaust & intake camshaft on cylinder head cover | ||
| TS5x20 | Tightening torque | 4 Nm |
| Crankshaft sensor to crankcase | ||
| Crankshaft sensor | Tightening torque | 4.5 Nm |
| Exhaust camshaft sensor to cylinder head cover | ||
| TS5x20 | Tightening torque | 4 Nm |
| Holder for transmission oil line | ||
| Screw | Tightening torque | 4 Nm |
| Holder on end cover | ||
| M6X16 | Tightening torque | 8 Nm |
| Intake camshaft sensor to cylinder head cover | ||
| TS5x20 | Tightening torque | 4 Nm |
| Knock sensor to crankcase | ||
| M8x30 Observe Tightening torque without fail! |
Tightening torque | 21.5 Nm |
| Thermostat holder to crankcase/end cover | ||
| M6X16 | Tightening torque | 8 Nm |