Install camshaft position sensor of intake camshaft
Prepare the camshaft position sensor
- Check sealing ring (1) for damage, replace if necessary.
- Feed in and install the camshaft sensor (3).
- Tighten down screw (2).
TIGHTENING TORQUE SPECIFICATION
| Camshaft position sensor for intake camshaft on cylinder head cover | ||
|---|---|---|
| TS5x20 | tightening torque | 4 Nm |
- Connect connectors (1) and lock.
The connector (1) must engage audibly.
Follow-up work
- Refer to INSTALLING ACOUSTIC COVER .