Removing the model inscription at the rear
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- Mask off the working area with adhesive tape.
- Heat the rear model inscription (1) carefully with a hot air blower and release it from the tailgate with the special tool 0 496 571 (00 9 327)
.TECHNICAL DATA SPECIFICATION
Heating using hot air blower Surface temperature 40°C... 50°C - Remove adhesive residue from the trunk lid.CONSUMABLE SPECIFICATION
Adhesive remover 1 l, Can 83110009712 - Mask off the working area with adhesive tape.
- Heat the rear model inscription (1) carefully with a hot air blower and release it from the tailgate with the special tool 0 496 571 (00 9 327)
.TECHNICAL DATA SPECIFICATION
Heating using hot air blower Surface temperature 40°C... 50°C - Remove adhesive residue from the trunk lid.CONSUMABLE SPECIFICATION
Adhesive remover 1 l, Can 83110009712