Installing the 3rd brake light
NOTE:
RISK OF DAMAGE
Penetration of moisture through sealing residues of the 3rd brake light.
Moisture damage in the luggage compartment.
Penetration of moisture through sealing residues of the 3rd brake light.
Moisture damage in the luggage compartment.
- Completely remove sealing residues of the 3rd brake light on the tailgate.
NOTE:
TECHNICAL INFORMATION
The 3rd brake light is fitted with a double-sided adhesive seal and must therefore be replaced.
The 3rd brake light is fitted with a double-sided adhesive seal and must therefore be replaced.
- Brake light must be replaced.
Part: Brake lamp
- Remove protective film from seal (1).
- Connect the plug (1) with the 3rd brake light (2).
- Position the brake light (1) on the tailgate.
- Lock the locks (2).
Follow-up work
- Refer to INSTALLING THE TAILGATE TRIM PANEL .