Removing pedestrian protection sensor
Preliminary work
- Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to REMOVING SEAL FOR FRONT HOOD .
- Refer to REMOVING THE COVER FOR THE CENTER ENGINE COMPARTMENT .
- Refer to REMOVING CENTER RADIATOR ORNAMENTAL GRILLE .
- Refer to PARTIALLY RELEASING THE FRONT LEFT AND RIGHT WHEEL ARCH TRIM PANELS .
- Refer to PARTIALLY REMOVING TEMPERATURE SENSOR .
- Refer to REMOVING FRONT BUMPER COVER .
- Refer to REMOVING TOP AUTOMATIC AIR FLAP CONTROL .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Unlock and disconnect plug connections (1) .
- Guide out and remove the impact absorber (2)
.
- Remove pedestrian protection sensor (1) from impact absorber (2) .